Custom Order - On/Off Switch
from $13.00
This listing is for one (1) On/Off switch with the following specs:
- Depending on the switch chosen It might be installed on a flat back plate, if the original back plate is dome shaped, it might be replaced with a deeper back plate to allow a proper fit.
- Please choose the desired switch type through the drop down menu.
- Looking for a different finish/material/switch type not listed on the menu, please contact me for availability.
- This listing is just for the switch add-on, it has to be purchased in conjunction with the desired fixture.
- If the pull chain switch is chosen, it will be placed at the bottom of the back plate (6 o'clock position, except on plug-in fixtures, then it will be located at either 5 or 7 o'clock on the back plate.) and it will be about 4" long.
- Note that the full-range dimmer* will only work with incandescent bulbs.
* The dimmer for socket is only available for metal shell sockets, the dimmer for base works for both metal shell and porcelain sockets.
- Depending on the switch chosen It might be installed on a flat back plate, if the original back plate is dome shaped, it might be replaced with a deeper back plate to allow a proper fit.
- Please choose the desired switch type through the drop down menu.
- Looking for a different finish/material/switch type not listed on the menu, please contact me for availability.
- This listing is just for the switch add-on, it has to be purchased in conjunction with the desired fixture.
- If the pull chain switch is chosen, it will be placed at the bottom of the back plate (6 o'clock position, except on plug-in fixtures, then it will be located at either 5 or 7 o'clock on the back plate.) and it will be about 4" long.
- Note that the full-range dimmer* will only work with incandescent bulbs.
* The dimmer for socket is only available for metal shell sockets, the dimmer for base works for both metal shell and porcelain sockets.
Switch Type:
Quantity:
This listing is for one (1) On/Off switch with the following specs:
- Depending on the switch chosen It might be installed on a flat back plate, if the original back plate is dome shaped, it might be replaced with a deeper back plate to allow a proper fit.
- Please choose the desired switch type through the drop down menu.
- Looking for a different finish/material/switch type not listed on the menu, please contact me for availability.
- This listing is just for the switch add-on, it has to be purchased in conjunction with the desired fixture.
- If the pull chain switch is chosen, it will be placed at the bottom of the back plate (6 o'clock position, except on plug-in fixtures, then it will be located at either 5 or 7 o'clock on the back plate.) and it will be about 4" long.
- Note that the full-range dimmer* will only work with incandescent bulbs.
* The dimmer for socket is only available for metal shell sockets, the dimmer for base works for both metal shell and porcelain sockets.
- Depending on the switch chosen It might be installed on a flat back plate, if the original back plate is dome shaped, it might be replaced with a deeper back plate to allow a proper fit.
- Please choose the desired switch type through the drop down menu.
- Looking for a different finish/material/switch type not listed on the menu, please contact me for availability.
- This listing is just for the switch add-on, it has to be purchased in conjunction with the desired fixture.
- If the pull chain switch is chosen, it will be placed at the bottom of the back plate (6 o'clock position, except on plug-in fixtures, then it will be located at either 5 or 7 o'clock on the back plate.) and it will be about 4" long.
- Note that the full-range dimmer* will only work with incandescent bulbs.
* The dimmer for socket is only available for metal shell sockets, the dimmer for base works for both metal shell and porcelain sockets.
This listing is for one (1) On/Off switch with the following specs:
- Depending on the switch chosen It might be installed on a flat back plate, if the original back plate is dome shaped, it might be replaced with a deeper back plate to allow a proper fit.
- Please choose the desired switch type through the drop down menu.
- Looking for a different finish/material/switch type not listed on the menu, please contact me for availability.
- This listing is just for the switch add-on, it has to be purchased in conjunction with the desired fixture.
- If the pull chain switch is chosen, it will be placed at the bottom of the back plate (6 o'clock position, except on plug-in fixtures, then it will be located at either 5 or 7 o'clock on the back plate.) and it will be about 4" long.
- Note that the full-range dimmer* will only work with incandescent bulbs.
* The dimmer for socket is only available for metal shell sockets, the dimmer for base works for both metal shell and porcelain sockets.
- Depending on the switch chosen It might be installed on a flat back plate, if the original back plate is dome shaped, it might be replaced with a deeper back plate to allow a proper fit.
- Please choose the desired switch type through the drop down menu.
- Looking for a different finish/material/switch type not listed on the menu, please contact me for availability.
- This listing is just for the switch add-on, it has to be purchased in conjunction with the desired fixture.
- If the pull chain switch is chosen, it will be placed at the bottom of the back plate (6 o'clock position, except on plug-in fixtures, then it will be located at either 5 or 7 o'clock on the back plate.) and it will be about 4" long.
- Note that the full-range dimmer* will only work with incandescent bulbs.
* The dimmer for socket is only available for metal shell sockets, the dimmer for base works for both metal shell and porcelain sockets.